FP-3710T

|| FP-3900T || FP-3710T || FP-3710K || FP-3650T || FP-3600T || FP-3500T ||

Specifications FP-3710T

Item		Specifications
Model		FP3710-T42-U	FP3710-T42
Display	Display Type	TFT Color LCD (15 inch)
	Graphics	XGA (1024 x 768 pixels)
	Effective Display Area (W × H)	304.1mm [11.97in.] × 228.1mm [11.34in.]
	Display Colors	16,777,216 Colors
	Contrast Adjustment	Adjustable via OSD
	Backlight	CCFL (Replaceable)
Touch Panel	Type	Resistive Film (Analog)
	Resolution	1024 × 1024
	Interfaces	RS-232C or USB (Type B, USB 2.0 compatible)
External Interfaces	Video	Analog RGB or DVI-D*1
External Interfaces	USB (Type A) *2	Front port (USB 2.0 compatible)	-

*1Use one or the other.
*2Available for use when the touch panel USB cable (B type) is connected to a PC.

Item		Specifications
Model		FP3710-T42-U	FP3710-T42
Electrical	Rated Voltage (Rated Frequency)	AC100V to 240V (50/60Hz)
	Power Consumption	AC100V 1.1A or less AC240V 0.7A or less
	Allowable Voltage Drop	Shorter than 1 cycle (Note that pause occurrences must be more than 1 second apart)
	Voltage Endurance	AC1500V 20mA for 1 minute
	Insulation Resistance	10MΩ or more at DC500V (between charging and FG terminals)
Environmental	Ambient Operating Temperature*3	0°C to 50°C (within 30° from the installing angle vertical direction)
	Ambient Humidity	10%RH to 90%RH (no condensation)(wet-bulb temperature: 39°C or lower)
	Storage Temperature	-20 °C to +60 °C
	Storage Humidity	10%RH to 90%RH (no condensation)(wet-bulb temperature: 39°C or lower)
	Corrosive Gases	Free of corrosive gases
	Noise Immunity (via noise simulator)	Noise Voltage: 1500Vp-p Pulse Duration: 1μs Rise Time: 1ns
	Grounding	Protective and Functional Grounding: D-type grounding
	Electrostatic Discharge Immunity	6kV (EN61000-4-2 Level 3)
	Vibration Resistance	JIS B 3502, IEC61131-2 compatible 5Hz to 9Hz Half Amplitude 3.5mm 9Hz to 150Hz Constant Acceleration 9.8m/s² Applied in X, Y and Z directions 10 cycles for 100 minutes
Structural	Rating	Equivalent to IP65f (only for the front area when the panel is installed)*4
	Weight	Approx. 7.0kg [15.4lb]
	External Dimensions (W × H × D)	395mm [15.55in.] × 294mm [11.57in.] × 60mm [2.36in.]

*3"Ambient Operating Temperature" indicates the cabinet interior or panel face temperature.

*4 Meets IP65f testing requirements. Operation is not, however, guaranteed in every environment.

Size	H Sync.	V Sync.	Dot Clock
640×400	24.827kHz	56.420Hz	21.053MHz
640×400	31.469kHz	70.000Hz	25.175MHz
640×480	31.469kHz	59.992Hz	25.175MHz
640×480	35.000kHz	66.670Hz	30.240MHz
640×480	37.500kHz	75.000Hz	31.500MHz
720×400 *5	31.469kHz	70.000Hz	28.320MHz
800×600	37.879kHz	60.317Hz	40.000MHz
800×600	46.875kHz	75.000Hz	49.500MHz
1024×768	48.363kHz	60.004Hz	65.000MHz
1024×768	56.476kHz	70.069Hz	75.000MHz
1024×768	60.023kHz	75.029Hz	78.750MHz

*5 When you display in this resolution, set "720 x 400 display setting 720 x 400Mode" under "System Settings" to ON.

Input Signal Type	Analog RGB	DVI-D
Input Signal Characteristic	Image signal: analog RGB Synchronous signal: TTL level, negative true or positive true Scanning type: non-interlaced	DVI-D
Setting via OSD (On Screen Display)	CONTRAST, BRIGHTNESS, H-POS, V-POS, H-POSITION, PHASE, DIMMER, SHARPNESS, AUTO ADJUSTMENT, AUTO GAIN, DEFAULT(ALL RESET)	CONTRAST, BRIGHTNESS, SHARPNESS, DIMMER, DEFAULT (ALL RESET)

*Figure is FP3710-T42-U

For further information, see the following PDF catalog
	Industrial Personal Computer Catalog (Apr. 2009) PDF: 19,889KB
If you cannot open the PDF files, or do not know how to download the PDF, please click here.

	- All product names used in this page are the registered trademarks of their respective companies. - The unit's photos contained in this page may differ from those of the actual unit. - All information in this page is valid in April, 2009. - All information contained in this page is subject to change without notice.
	Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.